Homework 1 will introduce you to the tools we will use in this course. Most of the commands are specified for you in the linked instructions or below. At the end of this assignment, you should have a working system for future assignments and a basic understanding of ROS topics and nodes.

Instructions

First, set up your system: Setting Up Your Environment
Make sure you are in your repo directory, then use dts to build your docker image:
```
$ dts devel build --pull
```
This command will build your Dockerfile into an image that you can run as needed. It needs to be run when there are big changes, like when you update the template to your repo or when some Duckietown images are changed. We will discuss this more as the semester progresses. The “pull” option tells dts to check for any updates to other dependency images when it runs.

NOTE: This command may take several minutes, especially at step 10/57, the first time it runs. If you worry that it is not working, you can first download the biggest pre-requisite docker image by running the command below.
!!!Optional command below!!!
```
$ docker pull duckietown/dt-core:daffy-amd64
```
You can now run your image as a docker container using dts:
```
$ dts devel run -M -X --cmd bash
```
Let’s take a deeper look at this command:
1. “dts devel run” will start a Duckietown-based container (like what is in the class repo you used as a template) with a configuration that lets it run like Docker images will run on your robot. This saves us from writing a very long docker run command with many options. Proper documentation on this tool is still forthcoming.
2. The -M option mounts the current project to the working directory of the docker container. This allows us to write code outside of the container and run it inside, which can be handy depending on which text editor you prefer. It also lets us use git to store code as we write it. We won’t actually use this in HW1 but it will be our method for future homework/labs.
3. The -X option allows us to run graphical interfaces. You generally want to use this for homework assignments but it may not always work on the robot for labs.
4. The cmd option tells dts to run a bash shell (likely the same command line terminal as you are using) after starting the container so that you can type commands.
If you run “ls” inside this container you should see the contents of your repo here. These files are shared with your computer right now, so when you make changes on your computer they will also be changed in docker and vice versa.
We need to build the current ROS environment inside this container. This is largely done for us in Duckietown containers, but it is always good practice to double check. Run:
```
$ cd /code/catkin_ws/

$ source /code/catkin_ws/devel/setup.bash

$ catkin build

$ source /code/catkin_ws/devel/setup.bash
```
These commands allow you to use the correct environment for ROS and build everything in that environment. You will have to run these commands every time you create a new package. For this assignment, once is enough.
Time to start a ROS node! First, let’s start roscore:
```
$ roscore
```
This will run so that you cannot do anything else in this terminal until it is time to end roscore. Let’s start another terminal and connect it with your docker container. First, start a new terminal window, then change directory to your git repo and run:
```
$ dts devel run attach
```
This will give you a new command line interface to your running docker container.
You need to source your environment in this new terminal so that we can use all of the ROS-specific commands:
```
$ source /code/catkin_ws/devel/setup.bash
```
Now you can start the ROS node we will use in HW1:
```
$ rosrun turtlesim turtlesim_node
```
You should see a blue window with a turtle in the center. This command will also consume your terminal, so let’s start up a third shell (step 7) and source our environment (step 8). In this one, let’s use ROS tools to see what is running:
```
$ rosnode list
```
You should see “/turtlesim/sim” here.
This seems like a lot of terminals just to run a node and see what’s going on. Good news! There is a better way! We can start roscore and launch an arbitrary number of nodes using a single launch file and roslaunch. Press ctrl-c in each of these three terminals to end their current process. Unfortunately, turtlesim does not come with a launch file, but one is provided for you in your repo. From any of the terminals you used in the last step, run:
```
$ roslaunch turtlesim_helper turtlesim.launch
```
This will print some debug text to the screen and then stop printing information. The same blue window should pop up, although a different turtle may appear.
From either other terminal from step 4, run:
```
$ rosnode list
```
This shows all of the nodes that are currently running. You should see the same node you saw before.
In any terminal you set up in step 5, run:
```
$ rostopic list
```
This shows all active topics. Two topics, “/rosout” and “/rosout_agg” are almost always shown and we can ignore them for this assignment. We will focus on the topics that are part of this mystery node. These topics should have the prefix “/turtlesim/turtle1/”. This tells us that the developer of the code thinks they are in the same group.
Let’s figure out what is going on with this ROS node so we can use it. Use the rostopic info tool for all turtlesim topics. Record the publisher and subscriber for each one as well as the message type.
$ rostopic info <topic>
One topic will say that it has a subscriber but no publisher. This means that the ROS node /turtlesim/sim is listening (subscribing) to this topic. The other two topics will have a publisher but no subscriber. This means /turtlesim/sim is talking (publishing) over them. We can listen to the output of the ROS node using a command line tool. This is very useful for debugging. Run this command:
```
$ rostopic echo <topic>
```
For one of the topics that you think is being sent by /turtlesim/sim node. Leave this command running.
You will see streaming output that does not change. Usually, that means the node is waiting for some input. In other cases, there may be no output if no input is given. Let’s give it some input. You will need the name of the topic you decided the node is listening to as well as the type of the message. This is complex command, so a complete example is provided below. Run this in another terminal:
```
$ rostopic pub -1 /turtlesim/turtle1/cmd_vel geometry_msgs/Twist '{linear: {x: 1, y: 2.0, z: 0.0}, angular: {x: 0.0,y: 0.0,z: 3.0}}'
```
NOTE: that is a “dash one” (1) after the command. Some fonts are clearer than others. It makes rostopic pub send the message exactly once and exit.
Let’s look at this command a bit: rostopic pub tells ROS that we are going to send a message on the specified topic, of the specified type. You learned the topic name and type in the rostopic info step. The complicated text afterwards tells ROS what the contents of the message are. Each set of brackets indicates a message or submessage. Think of these as classes in Python or structs in C. This uses the JSON format, another format is displayed if you use tab complete (press tab) after entering the type. Try this instead and experiment with different values.
You should see changing output on the terminal running rostopic echo for one topic but not for the other. Send a few different values and see what happens. Record the inputs and outputs for multiple values without restarting the launch file. Do the same for the other output topic. What do you think this turtlesim/sim node is doing?
You can end all of the above processes (ctrl-c) and quit any docker containers (type “exit” in their terminal windows).
Back in your Linux system (not in the container started with dts), we can now submit your code. We need to give this commit a tag so that the instructor knows which commit to grade. First, let’s make sure you haven’t made any changes to the code. Run:
```
$ git status
```
And confirm that it says “nothing to commit”. If there is anything to commit, refer to the commit and push commands in the setup instructions.
Now we need to apply a tag. Tags should generally be HW# for homework and L# for labs. To tag this assignment, run the following in your repo directory:
```
$ git tag hw1

$ git push origin hw1
```
Remember to do this for each assignment you turn in!

Submission

To complete this assignment, submit the HW1 survey on Qualtrics (link on Blackboard) with the following information:

The tag used for the code component of this assignment (4 points)
The URL of your repository (starts with “git@github.com”), your username on whichever site it is, and the name of your repository (10 points)
NOTE: the URL should be for the SSH version, not HTTP(S), it should start with “git@github.com”
List the name of the two topics published by the turtlesim node and the message types they had. (8 points)
What was the name of the topic that the turtlesim node listened to? What type did it have? (4 points)
What is the turtlesim node doing between the input and the output? What were the inputs/outputs you used/observed? (4 points)
What is the late policy for homework assignments in this class? (5 points)
What is the late policy for labs in this class? (5 points)