2022 | Gao, P., Masato, D., Kundu, A., & Coulter, J. P. (2022). An Investigation on the Efficacy of Orotic Acid as a Bio-Nucleating Agent for Poly-Lactic Acid under Quiescent Condition and Injection Molding. Micromachines, 13(12), 2186. |
2022*,gr | Piccolo, L., Wang, Z., Lucchetta, G., Shen, M., & Masato, D. (2022). Ultrafast laser texturing of stainless steel in water and air environment. Lasers in Manufacturing and Materials Processing, 9(3), 434-453. |
2022*,gr | Masato, D., Piccolo, L., Lucchetta, G., & Sorgato, M. (2022). Texturing Technologies for Plastics Injection Molding: A Review. Micromachines, 13(8), 1211. |
2022*,gr,ug | Krantz, J., Caiado, A., Piccolo, L., Gao, P., Sorgato, M., Lucchetta, G., & Masato, D. (2022). Dynamic wetting characteristics of submicron‐structured injection molded parts. Polymer Engineering & Science, 62(7), 2093-2101. |
2022* | Masato, D., & Lucchetta, G. (2022). Advances in Micro and Nano Manufacturing: Process Modeling and Applications. |
2022*,gr,ug | Ullrich, F., Singh, S. P. V., McDonald, S., Krueger, A., Vera‐Sorroche, J., Amirkhizi, A., & Masato, D. (2022). Effect of strain rate on the mechanical properties of polycarbonate processed by compression and injection molding. Polymer Engineering & Science, 62(1), 174-184. |
2021*,gr,ug | Kazmer, D. O., Masato, D., Piccolo, L., Puleo, K., Krantz, J., Venoor, V., Austin Colon, Justin Limkaichong, Neil Dewar, Denis Babin, Cheryl Sayer, C. (2021). Multivariate Modeling of Mechanical Properties for Hot Runner Molded Bioplastics and a Recycled Polypropylene Blend. Sustainability (I.F.: 3.251; Q2), 13(14), 8102. |
2021*,ug,vs | Piccolo, L., Puleo, K., Sorgato, M., Lucchetta, G., & Masato, D. (2021). Modeling the replication of submicron-structured surfaces by micro injection molding. Materials & Design (I.F.: 7.991; Q1), 198, 109272. |
2021 | Masato, D., Sorgato, M., & Lucchetta, G. (2021). A new approach to the evaluation of ejection friction in micro injection molding. Journal of Manufacturing Processes (I.F.: 5.010; Q1), 62, 28-36. |
2021* | Masato, D., & Johnston, S. (2021). Project-Based Teaching of a Manufacturing Class During the COVID-19 Pandemic. Journal of Micro and Nano-Manufacturing (I.F.: 1.818; Q2). |
2020 | Sorgato, M., Zanini, F., Masato, D., & Lucchetta, G. (2020). Submicron laser‐textured vents for self‐cleaning injection molds. Journal of Applied Polymer Science (I.F.: 3.125; Q2), 137(42), 49280. |
2020*,ug | Dempsey, D., McDonald, S., Masato, D., & Barry, C. (2020). Characterization of Stereolithography Printed Soft Tooling for Micro Injection Molding. Micromachines (I.F.: 2.891, Q2), 11(9), 819. |
2020* | Sorgato, M., Masato, D., Piccolo, L., & Lucchetta, G. (2020). Plastic intensity reduction using thermally insulating coatings for injection molds. CIRP Journal of Manufacturing Science and Technology (I.F.: 3.602; Q1), 30, 79-86. |
2020*,vs | Orazi, L., Sorgato, M., Piccolo, L., Masato, D., & Lucchetta, G. (2020). Generation and characterization of Laser Induced Periodic Surface Structures on plastic injection molds. Lasers in Manufacturing and Materials Processing (I.F.: 1.673; Q2), 7(2), 207-221. |
2020*,vs | Loaldi, D., Piccolo, L., Brown, E., Tosello, G., Shemelya, C., & Masato, D. (2020). Hybrid process chain for the integration of direct ink writing and polymer injection molding. Micromachines (I.F.: 2.891, Q2), 11(5), 509. |
2020*,vs | Piccolo, L., Sorgato, M., Batal, A., Dimov, S., Lucchetta, G., & Masato, D. (2020). Functionalization of plastic parts by replication of variable pitch laser-induced periodic surface structures. Micromachines (I.F.: 2.891, Q2), 11(4), 429. |
2019 | Masato, D., Sorgato, M., Batal, A., Dimov, S., & Lucchetta, G. (2019). `Thin‐wall injection molding of polypropylene using molds with different laser‐induced periodic surface structures.` Polymer Engineering & Science (I.F.: 2.428; Q2), 59(9), 1889-1896. |
2019 | Masato, D., Babenko, M., Shriky, B., Gough, T., Lucchetta, G., & Whiteside, B. (2018). `Comparison of crystallization characteristics and mechanical properties of polypropylene processed by ultrasound and conventional micro-injection molding.` The International Journal of Advanced Manufacturing Technology (I.F.: 3.226; Q1), 99(1-4), 113-125. |
2018 | Sorgato, M., Masato, D., Lucchetta, G., & Orazi, L. (2018). `Effect of different laser-induced periodic surface structures on polymer slip in PET injection moulding.` CIRP Annals (I.F.: 3.916; Q1), 67(1), 575-578. |
2018 | Masato, D., Sorgato, M., Babenko, M., Whiteside, B., & Lucchetta, G. (2018). `Thin-wall injection molding of polystyrene parts with coated and uncoated cavities`. Materials & Design (I.F.: 7.991; Q1), 141, 286-295. |
2018 | Lucchetta, G., Masato, D., & Sorgato, M. (2018). `Optimization of mold thermal control for minimum energy consumption in injection molding of polypropylene parts`. (I.F.: 9.297; Q1), 182, 217-226. |
2018 | Sorgato, M., Masato, D., & Lucchetta, G. (2018). `Tribological effects of mold surface coatings during ejection in micro injection molding`. Journal of Manufacturing Processes (I.F.: 5.010; Q1), 36, 51-59. |
2018 | Masato, D., Sorgato, M., & Lucchetta, G. (2018). `Effect of ultrasound vibration on the ejection friction in microinjection molding`. The International Journal of Advanced Manufacturing Technology (I.F.: 3.226; Q1), 1-14. |
2017 | Sorgato M., Masato D., Lucchetta G., (2017). ‘Effect of vacuum venting and mold wettability on the replication of micro-structured surfaces,’ Microsystem Technologies (I.F.: 1.513; Q3), 23:7, pp. 2543-2552. |
2017 | Masato D., Sorgato M., Parenti P., Annoni M., Lucchetta G., (2017). ‘Impact of deep cores surface topography generated by micro milling on the demolding force in micro injection molding,’ Journal of Materials Processing Technology (I.F.: 5.551; Q1), 246, pp.211-223. |
2017 | Masato D., Sorgato M., Lucchetta G., (2017). ‘Characterization of the micro-injection compression molding process for the replication of high aspect ratio micro-structured surfaces,’ Microsystem Technologies (I.F.: 1.513; Q3), 23:8, pp. 3661-3670. |
2017 | Parenti P., Masato D., Sorgato M., Lucchetta G., Annoni M., (2017). ‘Surface footprint in molds micromilling and effect on part demoldability in micro injection molding,’ Journal of Manufacturing Processes (I.F.: 5.010; Q1), 29, 160-174. |
2017 | Sorgato, M., Masato, D., & Lucchetta, G. (2017). `Effects of machined cavity texture on ejection force in micro injection molding`. Precision Engineering (I.F.: 3.156; Q1), 50, 440-448. |
2017 | Masato, D., Rathore, J., Sorgato, M., Carmignato, S., Lucchetta, G., (2017). ‘Analysis of the shrinkage of injection-molded fiber-reinforced thin-wall parts,’ Materials & Design (I.F.: 7.991; Q1), 132, pp. 496-504. |
2017 | Masato, D., Sorgato, M., & Lucchetta, G. (2017). `Prototyping and modeling of the centrifugal casting process for paraffin waxes`. Materials and Manufacturing Processes` (I.F.: 4.616; Q1), 32(16), 1823-1830. |
2016 | Lucchetta G., Masato D., Sorgato M., Crema L., Savio E., (2016). ‘Effect of different mould coatings on polymer filling flow in thin-wall injection moulding,’ CIRP Annals Manufacturing Technology (I.F.: 3.916; Q1), 65:1, pp. 537-540. |
2016 | Masato D., Sorgato M., Lucchetta G., (2016). ‘Analysis of the influence of part thickness on the replication of micro-structured surfaces by injection molding,’ Materials & Design (I.F.: 7.991; Q1), 95, pp. 219-224. |
2018 | Lucchetta G., Sorgato M., Masato D., `Vacuum-Assisted Micro Injection Molding` Chapter 8 of Micro Injection Molding, ed. Tosello G., publ. Hanser, ISBN: 978-1-56990-653-8, 2018 |
2022*,gr,ug | `Pressure-controlled injection molding of recycled polyolefins`, Joshua Krantz*, Peng Gao, Zarek Nieduzak, Elizabeth Kazmer, Olvia Ferki, Margaret Sobkowicz-Klein, Davide Masato – SPE ANTEC – Charlotte, NC, June 14-16, 2022. |
2021*,gr,ug | `Transparent layered composite for protective eyewear applications`, Sean McDonald*, Fabian Ullrich, Davide Masato, Alexandred Krueger, Shailendra P.V. Singh, Alireza Amirkhizi – Annual Technical Conference – ANTEC, Conference Proceedings 2021-May |
2021*,gr,ug | `Wetting characteristics of microstructures on injection molded parts`, Joshua Krantz*, Davide Masato, Ashley Caiado, Leonardo Piccolo, Marco Sorgato, Giovanni Lucchetta – Annual Technical Conference – ANTEC, Conference Proceedings 2021-May |
2021*,vs | `Multi-scale modeling of the replication of submicron-structures by micro injection molding`, Leonardo Piccolo*, Giovanni Lucchetta, Marco Sorgato, Davide Masato – Annual Technical Conference – ANTEC, Conference Proceedings 2021-May |
2021* | `Characterization of in-mold shrinkage using a multi-variate sensor`, Davide Masato*, David Kazmer, Rahul Panchal – Annual Technical Conference – ANTEC, Conference Proceedings 2021-May |
2021*,gr,vs | `Numerical investigation on the effect of heat transfer coefficient in injection molding`, Anshal Jilka*, Leonardo Piccolo, Davide Masato – Annual Technical Conference – ANTEC, Conference Proceedings 2021-May |
2021*,gr,ug | `Effect of strain rate and thermal history on the mechanical properties of polycarbonate`, Sean McDonald, Fabian Ullrich*, Davide Masato, Javier Vera-Sorroche, Alexandred Krueger, Shailendra P.V. Singh, Alireza Amirkhizi, David Phelps – Annual Technical Conference – ANTEC, Conference Proceedings 2021-May |
2021*,ug,vs | `Novel Process Chain for the Integration of Printed Electronics with Micro-Injection Molded Parts`, Joshua Krantz*, Paul Falvo, Davide Masato, Dario Loaldi, Guido Tosello, Katherine Berry, Corey Shemelya – World Congress on Micro and Nano Manufacturing 2021-September |
2020*,vs | `Submicron texturing of injection molds using femtosecond laser`, Piccolo L.*, Sorgato M., Lucchetta G., Masato D. – ANTEC 2020 The Virtual Edition (May 2020) |
2020*,ug,vs | `Hot runner molding of bioplastics and recyclates`, Masato D.*, Kazmer D., Piccolo L., Puleo K., Krantz J., Venoor V., Colon A., Limkaichong J., Dewar N., Babin D., Sayer C. – ANTEC 2020 The Virtual Edition (May 2020) |
2019*,vs | Analysis of the Replication of Sub-Micrometer Laser Textures on Injection Molded Parts – Piccolo L.*, Sorgato M., Masato D., Batal A., Dimov S., Lucchetta G. – Aitem Conference (Sept. 2019) – Padova, Italy. |
2019 | Injection molding of thinner parts using mold surface coatings – Masato D.*, Sorgato M., Piccolo L., Lucchetta G. – ANTEC Conference (March 2019) – Detroit, MI (US) |
2019 | Injection Molding of Thinner Parts using Innovative Solutions for Mold Surface Engineering – Masato D., Sorgato M., Lucchetta G. – Keynote Presentation at ANTEC Conference (March 2019) – Detroit, MI (US) |
2019 | Effect of laser – induced periodic surface structures on the self – cleaning properties of venting in injection molding – Sorgato M., Zanini F., Masato D., Lucchetta G. – ANTEC Conference (March 2019) – Detroit, MI (US) |
2018 | Effect of laser-induced periodic surface structures on wall slip of polypropylene in thin-wall injection molding – Masato D., Sorgato M., Batal A., Dimov S., Lucchetta G. – WCMNM Conference (Sept. 2018) – Portoroz (Slovenia) |
2018 | Effect of different laser-induced periodic surface structures on polymer slip in PET injection moulding – Sorgato, M., Masato, D., Lucchetta, G., & Orazi, L. – CIRP Conference (Aug. 2018) – Tokyo (Japan). |
2018 | Effect of different mold surface coatings on the ejection force in micro injection molding – Sorgato M. *, Masato D., Lucchetta G. – EUSPEN Conference (Jun. 2018) – Venice (Italy). |
2018 | Injection molding of thinner parts using mold surface coatings – Masato D., Sorgato M., Lucchetta G. – ANTEC Conference (May 2018) – Orlando, FL. (US) |
2017 | Optimization of mold thermal control for minimum energy consumption in injection molding of polypropylene parts – Lucchetta G., Masato D., Sorgato M. – Aitem Conference (Sept. 2017) – Pisa (Italy). |
2017 | Effects of different mold surface coatings on the ejection force in micro injection molding – Sorgato M., Masato D., Lucchetta G. – Aitem Conference (Sept. 2017) – Pisa (Italy). |
2017 | Effect of fiber orientation and process parameters on shrinkage in injection molding of thin-walled micro parts – Masato D., Rathore J., Sorgato M., Carmignato S., Lucchetta G. – ANTEC Conference (May 2017) – Anaheim (CA, US). |
2017 | Reduction of energy consumption in injection molding of polypropylene parts through the optimization of mold thermal control – Lucchetta G., Masato D., Sorgato M. – ANTEC Conference (May 2017) – Anaheim (CA, US). |
2017 | Effect of process parameters on dimensional accuracy of fiber-reinforced thin-walled micro moulded part – Rathore J., Masato D., Sorgato M., Lucchetta G., Carmignato S. – EUSPEN Conference (May 2017) – Hannover (Germany). |
2017 | Prediction of ejection force in micro injection molding by calibration of a shrinkage model – Masato D., Sorgato M., Lucchetta G. – WCMNM (Mar. 2017) – Kaohsiung (Taiwan). |
2017 | CT-based investigation on fiber orientation and its effects on shrinkage behavior of micro injection molded parts – Rathore J., Masato D., Sorgato M., Lucchetta G., Carmignato S. – iCT Conference (Feb. 2017) – Leuven (Belgium). |
2016 | Impact of micro milling strategy on the demolding forces in micro injection molding – Masato D., Sorgato M., Parenti P., Annoni M., Lucchetta G. – 4M Conference (Sept. 2016) – Copenhagen (Denmark). |
2016 | Effects of Different Mould Coatings on Polymer Filling Flow in Thin-Wall Injection Moulding – Sorgato M., Masato D., Lucchetta G. – 4M Conference (Sept. 2016) – Copenhagen (Denmark). |
2016 | Effects of different mould coatings on polymer filling flow in thin-wall injection moulding – Lucchetta G., Masato D., Sorgato M., Crema L., Savio E. – CIRP Conference (Aug. 2016) – Guimaraes (Portugal). |
2016 | Investigation of the injection-compression molding process for the replication of high aspect ratio micro-structured surfaces – Masato D., Sorgato M., Lucchetta G. – ICOMM Conference (Mar. 2016) – Irvine (CA, US). |
2015 | Study of ejection forces in micro injection molding as a function of mold surface finish obtainable by micro milling – Parenti P., Masato D., Sorgato M., Annoni M., Lucchetta G. – Aitem Conference (Sept. 2015) – Palermo (Italy). |
2015 | Analysis of the influence of part thickness on the replication of microstructured surfaces by injection molding – Masato D., Sorgato M., Lucchetta G. – 4M/ICOMM Conference (Apr. 2015), Milan (Italy). |
2015 | Injection molding of nano-structured polylactic acid surfaces for bone regeneration studies – Sorgato M., Masato D., Lucchetta G. – 4M/ICOMM Conference (Apr. 2015), Milan (Italy). |
10/28/2022 | REMADE Members Meeting Panel Discussion: Tackling Circularity for Polymers |
03/30/2022 | Moldex3D Molding Innovation Day at UMass Lowell: Plastic Product Design for Metal Replacement using the Moldex3D FEA Interface |
07/21/2022 | Plastindia International University: Introduction to injection molding simulation and its applications |
08/2/2022 | SPE National Week of Injection Molding: Introduction to injection molding simulation and its applications |
2021 | 3M Plastics Molding Tech Forum: Laser Etching and its Effect on the Molding Process |
2021 | DesignNews Webinar: Busting the Myths of Micro Molding |
2021 | Moldex3D Molding Innovation Day: Numerical Analysis of the Effect of Heat Transfer Coefficient on Injection Molding Simulation |
2021 | REMADE Training Webinar Series: Product Design Considerations for Plastics Recycling |
2020 | `MMT Chats: Virtual R&D and Teaching Plastic Injection Mold Design` video chat with Christina Fuges (Editorial Director, Mold Making Technology) about the importance of plastics engineering, and how COVID-19 changed the faculty’s approach to teaching mold engineering and plastics research. |
2020 | `Characterization of the Effect of Mold Surface Properties on Injection Molding Polymer Flow`, Moldex3D Virtual Symposium (September 2020) |
2019 | Department of Industrial Engineering, University of Padova (Padova, Italy), 09/12/2019 – ` Surface engineering for plastics manufacturing: innovative design solutions for a reduced environmental impact of plastic` |
2019 | Moldex3D Molding Innovation Day 2019 at University of Massachusetts Lowell (Lowell, MA – US), 05/14/2019 – `Injection Molding of Thin-wall Parts Using Mold Surface Engineering` |
2020* | `Hybrid molding with selective release, additive material system`. US Patent application submitted by UML OTC. Inventors: Corey Shemelya (UML, ECE), Davide Masato. |
2019 | Lucchetta G., Masato D., Sorgato M., `Mold for injection molding processes and molding process using the mold`. EP19700391.6A, PCT/EP2019/050818. |
2019 | Marco Sorgato, Giovanni Lucchetta, Leonardo Orazi, Davide Masato, Federico Bessegato, Andrea Cavalet, Matteo Zoppas, `Preform mold component`. Application PCT/IB2020/050305 |
2022*,gr,ug | `Investigation of in-mold rheology for process control of recycled polyolefins`, Joshua Krantz, Zarek Nieduzak, Peng Gao, Elizabeth Kazmer, Olivia Ferki, Margaret Sobkowicz-Kline, Davide Masato – Polymer Processing Society Conference (PPS37) – April 11-15, 2022, Fukuoka, Japan. |
2022*,gr | `Reactive extrusion for modifying post-industrial polyolefins in preparation for mechanical recycling`, Olivia Ferki, Joshua Krantz, Peng Gao, Kizazeal Forsyth, Margaret Sobkowicz-Kline, Davide Masato – Polymer Processing Society Conference (PPS37) – April 11-15, 2022, Fukuoka, Japan. |
2022*,gr,ug | `Effect of velocity-controlled and pressure-controlled filling on the morphology evolution of semi-crystalline injection molded parts`, Peng Gao, Joshua Krantz, Olivia Ferki, Margaret Sobkowicz-Kline, and Davide Masato – Polymer Processing Society Conference (PPS37) – April 11-15, 2022, Fukuoka, Japan. |
2022*,gr | `Cost and Sustainability Comparison of Injection Molding with |
2022*,gr | `Energy efficiency of polymer additive manufacturing by material extrusion`, David Kazmer*, Amy Peterson, Davide Masato, Austin Colon, Joshua Krantz – Additive Manufacturing Benchmarking – August 15-18, 2022, Bethesda, Maryland, US. |
2021*,gr,vs | Krantz J., Loaldi D., Piccolo L., Shemelya C., Tosello G., Masato D., ` In-Line Integration of 3D Printed Electronics in Plastic Parts by Injection Molding`. 36th International Conference of the Polymer Processing Society. 26-29 Sept. 2021, Montreal, Canada. |
2021*,ug,vs | Masato D., Piccolo L., Puleo K., Sorgato M., Lucchetta G., ` Modeling the replication of laser ablated textures by micro injection molding`. 36th International Conference of the Polymer Processing Society. 26-29 Sept. 2021, Montreal, Canada. |
2021* | Masato, D., & Lucchetta, G. (2021). Editorial for the Special Issue on Advances in Micro and Nano Manufacturing: Process Modeling and Applications. Micromachines. |
2021* | Masato D. ` Global Perspective on Next-Generation Mold Engineers`. Mold Making Technology Magazine. |
2021*,gr,vs | Krantz J., Masato D., Piccolo L., Lucchetta G., ` Dynamic wetting surface functionalization of plastic parts using injection molding`. SPE Injection Molding Division Newsletter. |
2021* | Masato D., ` Global Perspective on Next-Generation Mold Engineers: Main Takeaways from an SPE Mold Technologies Division Panel Discussion`. SPE Mold Technologies Division Newsletter. |
2020* | Camtasia Panel Discussion, Yan Luo, Abiche Dewilde, Stephen Johnston, Davide Masato, Dan Sullivan – FCOE Spring 2020 Retreat. |
2020* | Masato D., Johnston S. (2020) `How to Learn Mold Design Virtually`, Mold Making Technology Magazine. |
2020* | Masato D. (2020) ` A Look at Three Mold Surface Effects`, Mold Making Technology Magazine. |
2020*,gr,vs | Ullrich F., Piccolo L., Masato D. `Design of a plastic bike rear derailleur for metal replacement`, Moldex3D Digital Twin Live 2020. |
2020*,vs | Brown E., Loaldi D., Berry K., Masato D., Shemelya C., `Combining Technologies: In-situ Direct-Write Techniques for Hybrid Injection Molded Electronics`, , International Solid Freeform Fabrication Symposium (SFF Symp 2020). |
2020*,gr | Singh S.P.V., Ullrich F., Masato D., Amirkhizi A., `High-velocity projectile impact on thin transparent brittle laminated composite systems`, American Society for Composites 35th Technical Conference, Jersey City, NJ, USA – September 14-16, 2020. |
2020* | Masato D., Shemelya C., `Hybrid process chain for the functionalization of plastic parts`, Plastics in Electronics (the Virtual Edition), SPE. |
2020*,gr | Singh S.P.V., Ullrich F., Masato D., Amirkhizi A., `High-Velocity Projectile Impact on Thin Transparent Laminated Composite Systems`, 2020 ASME International Mechanical Engineering Congress & Exposition Virtual Conference. |
2019*,vs | Piccolo L., Sorgato M., Lucchetta G., Masato D., `Injection molding for the replication of nano-structured polymer surfaces`, Harvard Center for Nano Science Open House Poster Session (Nov. 2019) – Cambridge, MA (US). |
2019 | Masato D., Sorgato M., Lucchetta G., `Tribological properties of plastic injection molds`, STLE Tribology Frontiers Conference (Oct. 2019) – Chicago, IL (US). |
2019 | Masato D., Sorgato M., Batal A., Dimov S., Lucchetta G., `Slip of polypropylene melts over laser‐induced periodic nano‐structures having different dimensions`, PPS Conference (May 2019) – Izmir, Turkey. |
2019 | Sorgato M., Zanini F., Masato D., Lucchetta G., `Effect of laser–induced periodic surface structures in the self cleaning properties of venting in injection molding`, PPS Conference (May 2019) – Izmir, Turkey. |
2018 | Masato D., Sorgato M., Lucchetta G., `Effect of laser-induced periodic surface structures on thickness reduction in thin-wall injection molding`, PPS Americas Conference (Nov. 2018) – Boston (MA, US). |
2018 | Masato D., Sorgato M., Lucchetta G., Piccolo L., `Effect of Laser-Induced Periodic Surface Structures on mold venting` technical report to SIPA S.p.A. – June, 2018. |
2018 | Sorgato M., Masato D., Lucchetta G., `Slip of Polymer Melts Over Laser-Induced Periodic Nano-Structures in Injection Moulding Process`, PPS 34 Conference (May 2018) – Taipei (Taiwan) |
2018 | Masato D., Cazzaro L., Sorgato M., Lucchetta G., `Effects of Mold Surface Coatings on Thickness Reduction in Thin-Wall Injection Molding,` PPS 34 Conference (May 2018) – Taipei (Taiwan). |
2018 | Masato D., Sorgato M., Lucchetta G., Cazzaro L., `Effect of mold surface coatings on thickness reduction in injection molding of PPSU and PSU` technical report to Tecniplast S.p.A. – February, 2018. |
2017 | Masato D., Babenko B., Lucchetta G., Whiteside B., `Flow visualization of thin-wall injection molding and effect of mold coatings`, PPS Regional Conference (Jun. 2017) – Dresden (Germany). |
2017 | Sorgato M., Masato D., Lucchetta G., `Effects of different mold surface coatings on the ejection force in micro injection molding,` PPS Regional Conference (Jun. 2017) – Dresden (Germany). |
2016 | Masato D., Sorgato M., Lucchetta G., `Modelling and Prototyping of the Centrifugal Casting Process of Paraffin-Based Thermoplastic Polymers`, PPS Conference (Jul. 2016) – Lyon (France). |
2016 | Sorgato M., Masato D., Lucchetta G., `Effects of Different Mold Coatings on Polymer Filling Flow in Thin-Wall Injection Molding`, PPS Conference (Jul. 2016) – Lyon (France). |
2016 | Masato D., Sorgato M., Lucchetta G., `Characterization of Nylon layer thickness in multi-layers co-injection molded PET preforms` technical report to Nestle` Waters S.p.A. – June, 2016 |
2016 | Masato D., Crema L., Sorgato M., Lucchetta G., Lorenzet D., `Effect of mold surface coatings on injection pressure in injection molding of PET preforms` technical report to SIPA S.p.A. – April, 2016 |
2016 | Masato D., Giusti R., Lucchetta G.,`Re-design of a pulley for a washing machine` technical report to Electrolux S.p.A. – February, 2016 |
2015 | Masato D., Lucchetta G., Pavarin D., Barato F. `Hybrid Technology Study Development Road Map’ technical report to Israeli Aerospace Industries Ltd. MLM Division – October, 2015 |
2015 | Masato D., Sorgato M., Lucchetta G., `Analysis of the Replication of High Aspect Ratio Micro-Structured Surfaces by Injection-Compression Molding`, PPS Regional Conference (Sept. 2015) – Graz (Austria). |
2014 | Sorgato M., Masato D., Lucchetta G., `Lab on chip: piccolo, anzi piccolissimo’, Plastix – February, 2014 |
Legend | Classification | |
* | Dr. Masato publication from research carried out at UML. | |
gr | Publication from directly advised UML graduate student. | |
ug | Publication involving directly advised UML undergraduate students. | |
vs | Publication from research carried out by a visiting scholar at UML. |