Moshe, A., Kazmer, D.O., Johnston, S.P., Malloy, R.A., Kenig, S. (2016) “Analysis of variance in capillary rheometry,” Polymer Engineering & Science 56:8 pp. 895–904
Kazmer, D.O. (2016) “Design of Plastic Parts,” Elsevier pp. 593-616
Mendible, G., Kazmer, D.O., Gao, R., Johnston, S.P. (2016) “Estimation of Bulk Melt-Temperature from In-Mold Thermal Sensors for Injection Molding, Part B: Validation,” International Polymer Processing 31:3 pp. 278–284
Kazmer, D., Fan, Z., Gao, R., Wang, P. (2016) “Multi-sensor data fusion for improved measurement accuracy in injection molding.,” Instrumentation and Measurement Technology Conference Proceedings (I2MTC), 2016 IEEE International pp. 1-5
Kazmer, D.O. (2016) “Three Dimensional (3D) Printing of Thermoplastics,” Elsevier pp. 617-634
Gao, R.X., Fan, Z., Kazmer, D.O. (2016) “Method and system for multivariate remote monitoring of polymer processing,” Patents United States Patent No. 9,446,544
Coogan, T., Kazmer, D.O. (2016) “FDM Bond Strength: Experiments and Simulations Based on Healing Models,” Lyon, France
Kazmer, D.O., Coogan, T.J., Mead, J., Barry, C., Johnston, S., Malloy, R., Sobkowicz-Kline, M., Moshe, A. (2016) “A Protocol for Filament Production and Use in Fused Deposition Modeling,”
Kazmer, D.O. (2016) “Single Pellet Extrusion,”
Kazmer, D.O. (2016) “Single Pellet Extrusion with a Fractal Screw Design,” Shenkar College of Engineering and Design
Kazmer, D.O. (2016) “Current & Future Research on Rheological Constitutive Modeling,” Shenkar College of Engineering and Design
Kazmer, D.O., Gordon, G.W., Mendible, G.A., Johnston, S.P., Tang, X., Fan, Z., Gao, R.X. (2015) “A multivariate sensor for intelligent polymer processing,” IEEE/ASME Transactions on Mechatronics 20:3 pp. 1015-1023
Johnston, S.P., Mendible, G.A., Gao, R.X., Kazmer, D.O. (2015) “Estimation of bulk melt-temperature from in-mold thermal sensors for injection molding, part A,” International Polymer Processing
Kazmer, D.O. (2015) “Modeling of Polymer Rheology,” Darmstadt University of Applied Sciences
Kazmer, D.O., Moshe, A., Johnston, S.P., Malloy, R.A., Kenig, S. (2014) “Dynamics and hysteresis in capillary rheometry,”
Kazmer, D.O., Moshe, A., Johnston, S.P., Malloy, R., Kenig, S. (2014) “Dynamics and Hystersis in Capillary Rheometry,” Society of Plastics Engineers Annual Technical Conference60:
Johnston, S.P., Mendible, G., Gao, R., Kazmer, D.O. (2014) “Estimation of Bulk Melt Temperature from In-mold Thermal Sensors for Injection Molding. Part A: Method,” International Polymer Processing
Mendible, G., Kazmer, D.O., Gao, R., Johnston, S.P. (2014) “Estimation of Bulk Melt Temperature from In-mold Thermal Sensors for Injection Molding. Part B: Validation,” International Polymer Processing
Johnston, S.P., McCready, C., Hazen, D., VanDerwalker, D., Kazmer, D.O. (2014) “On-line multivariate optimization of injection moulding,” Polymer Engineering and Science
Kazmer, D.O., Moshe, A., Johnston, S.P., Malloy, R., Kenig, S. (2014) “Variance Analysis in Polymer Melt Viscosity Characterized by a Capillary Rheometer,” International Conference of the Polymer Processing Society 30:
Kazmer, D.O., Johnston, S.P., Gordon, G., Gao, R., Fan, Z., Asadiznajani, N. (2012) “A Multivariate In-Mold Sensor Design for Measurement of Melt Pressure, Temperature, Velocity, and Viscosity,” Society of Plastics Engineers Annual Technical Conference 58:
Kazmer, D.O., Johnston, S.P., Abou-Shady, L., Hazen, D., Ambrozic, C. (2012) “Multivariate Modeling, Fault Detection, and Validation for the Extrusion Process,” Society of Plastics Engineers Annual Technical Conference 58:
Moriarty, M., Kazmer, D.O., Johnston, S.P., Santeufemio, C. (2012) “Passive Multi-Scale Alignment and Assembly,” Society of Plastics Engineers Annual Technical Conference 58:
Fang, L., Wei, M., Shang, Y., Kazmer, D.O., Barry, C., Mead, J. (2012) “Precise pattern replication of polymer blends into nonuniform geometries via reducing interfacial tension between two polymers,” Langmuir 28:27 pp. 10238-10245
Kumar, A., Kazmer, D.O., Barry, C.M., Mead, J.L. (2012) “Pulsed electric field assisted assembly of polyaniline,” Nanotechnology 23:33
Kazmer, D.O., Johnston, S.P., Abou-Shady, L. (2011) “Extrusion Instrumentation and Characterization,” Society of Plastics Engineers Annual Technical Conference 57:
Kazmer, D.O., Johnston, S.P., Gao, R.X., Fan, Z. (2011) “Feasibility analysis of an in-mold multi-variate sensor,” International Polymer Processing 26:1 pp. 63-72
Johnston, S.P., Kazmer, D.O., Abou-Shady, L. (2011) “Multivariate Fault Detection for the Extrusion Process,” Society of Plastics Engineers Annual Technical Conference 57:
McCready, C., Hazen, D., Johnston, S.P., VanDerwalker, D., Kazmer, D.O. (2011) “On-Line Optimization for Injection Molding,” Society of Plastics Engineers Annual Technical Conference 57:
Kazmer, D.O., Johnston, S.P., Moriarty, M., Santeufemio, C. (2011) “Passive Multi-Scale Alignment,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition 11: pp. 747
Shang, Y., Fang, L., Wei, M., Barry, C., Mead, J., Kazmer, D.O. (2011) “Verification of numerical simulation of the self-assembly of polymer-polymer-solvent ternary blends on a heterogeneously functionalized substrate,” Polymer 52:6 pp. 1447-1457
Kazmer, D.O., Velusamy, S., Westerdale, S., Johnston, S.P., Gao, R.X. (2010) “A Comparison of Seven Filling to Packing Switchover Methods for Injection Molding,” Polymer Engineering and Science 50:10 pp. 2031-2043
Shang, Y., Kazmer, D.O. (2010) “A MATLAB program for quantitative simulation of self-assembly of polymer blend films with nano-scaled features,” arXiv.org, e-Print Archive, Condensed Matter pp. 1-19
Kazmer, D.O., Johnston, S.P., Gao, R. (2010) “Feasibility Analysis of an In-Mold Multivariate Sensor,” Polymer Processing Society Annual Conference
Panchal, R.R., Kazmer, D.O. (2010) “In-situ shrinkage sensor for injection molding,” Journal of Manufacturing Science and Engineering, Transactions of the ASME 132:6
Shang, Y., Kazmer, D.O., Wei, M., Barry, C., Mead, J. (2010) “Numerical simulation of the self-assembly of a polymer-polymer-solvent ternary system on a heterogeneously functionalized substrate,” Polymer Engineering and Science 50:12 pp. 2329-2339
McCusker, J.R., Danai, K., Kazmer, D.O. (2010) “Validation of dynamic models in the time-scale domain,” Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME 132:6
Kazmer, D.O., Westerdale, S. (2009) “A model-based methodology for on-line quality control,” International Journal of Advanced Manufacturing Technology 42:3-4 pp. 280-292
Kazmer, D.O., Johnston, S.P. (2009) “Chapter 20: Instrumentation and Control of Plastics Moulding Processes,” CRC Press/Woodhead Publishing LTD pp. 655-680
Kazmer, D.O., Johnston, S.P., VanDerwalker, D. (2009) “Efficacy of Saturated Design of Experiments in Multivariate Process Characterization,” Society of Plastics Engineers Annual Technical Conference 55:
Kazmer, D.O., Johnston, S.P., VanDerwalker, D. (2009) “Multivariate Robustness Measurement,” Society of Plastics Engineers Annual Technical Conference 55:
Johnston, S.P., Kazmer, D.O., Gao, R. (2009) “On-line simulation based process control for injection molding,” Polymer Engineering and Science 49:12 pp. 2482-2491
Fang, L., Wei, M., Shang, Y., Jimenez, L., Kazmer, D.O., Barry, C., Mead, J. (2009) “Surface morphology alignment of block copolymers induced by injection molding,” Polymer 50:24 pp. 5837-5845
Johnston, S.P., Kazmer, D.O. (2009) “Teaching Mold Design: From Concept to Creation,” Society of Plastics Engineers Annual Technical Conference 55:
Kazmer, D.O., Velusamy, S., Westerdale, S., Johnston, S.P., Gao, R. (2008) “A Comparison of Seven Switchover Methods for Injection Molding,” Society of Plastics Engineers Annual Technical Conference 54:
Kazmer, D.O., Westerdale, S., Hazen, D. (2008) “A Comparison of Statistical Process Control (SPC) and On-Line Multivariate Analyses (MVA) for Injection Molding,” International Polymer Processing 23:5 pp. 447-458
Johnston, S.P., Kazmer, D.O., Gao, R. (2008) “In-Mold Temperature and Pressure Sensors for On-Line Detection of Jetting,” Society of Plastics Engineers Annual Technical Conference54:
Johnston, S.P., Kazmer, D.O. (2008) “Lions and Tigers and Freshmen,” Society of Plastics Engineers Annual Technical Conference 54:
Flaharty, R., Gidwant, M., Somani, P., Johnston, S.P., Kazmer, D.O. (2008) “Melt Bulk Temperature Dynamics During Mold Filling,” Society of Plastics Engineers Annual Technical Conference 54:
Shang, Y., Kazmer, D.O., Wei, M., Mead, J., Barry, C. (2008) “Numerical simulation of phase separation of immiscible polymer blends on a heterogeneously functionalized substrate.,” The Journal of chemical physics 128:22
Cui, Y., Gao, R.X., Yang, D., Kazmer, D.O. (2007) “A bond graph approach to energy efficiency analysis of a self-powered wireless pressure sensor,” Smart Structures and Systems 3:1 pp. 1-22
Johnston, S.P., Kazmer, D.O., Fan, Z., Gao, R. (2007) “Causes of Melt Temperature Variations Observed in the Nozzle During Injection Molding,” Society of Plastics Engineers Annual Technical Conference 53:
Johnston, S.P., Kazmer, D.O., Fan, Z., Gao, R. (2007) “Estimation of Bulk Melt Temperature from In-Mold Sensors: Part 2 – Convection,” Society of Plastics Engineers Annual Technical Conference 53:
Karania, R., Kazmer, D.O. (2007) “Low volume plastics manufacturing strategies,” Journal of Mechanical Design, Transactions Of the ASME 129:12 pp. 1225-1233
Dong, S., Chunsheng, E., Fan, B., Danai, K., Kazmer, D.O. (2007) “Process-driven input profiling for plastics processing,” Journal of Manufacturing Science and Engineering, Transactions of the ASME 129:4 pp. 802-809
Fan, Z., Hamid, M., Gao, R., Johnston, S.P., Kazmer, D.O. (2007) “Structural Optimization of Dual-sensing Module for Temperature and Pressure Measurement in Injection Mold Cavity,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition 9: pp. 941
Kazmer, D.O., Gupta, D. (2006) “A low force valve for dynamic control of molten plastics in a mold,” International Polymer Processing 21:2 pp. 175-182
Fan, B., Kazmer, D.O., Nageri, R. (2006) “An analytical non-Newtonian and nonisothermal viscous flow simulation,” Polymer – Plastics Technology and Engineering 45:3 pp. 429-438
Zhang, L., Theurer, C.B., Gao, R.X., Kazmer, D.O. (2006) “Analytic wavelet-based ultrasonic pulse differentiation for injection mold cavity pressure measurement,” Journal of Manufacturing Science and Engineering, Transactions of the ASME 128:1 pp. 370-374
Johnston, S., Kazmer, D.O. (2006) “Decoupled gating and simulation for injection molding,” Polymer – Plastics Technology and Engineering 45:4 pp. 575-584
Kazmer, D.O., Gupta, D., Munavalli, M., Kudchadkar, V., Nageri, R. (2006) “Design and performance analysis of a self-regulating melt pressure valve,” Polymer Engineering and Science 46:4 pp. 549-557
Johnston, S.P., Kazmer, D.O. (2006) “Estimation of Melt Temperature from In-Mold Temperature Sensor Data,” Society of Plastics Engineers Annual Technical Conference 52:
Theurer, C.B., Zhang, L., Kazmer, D.O., Gao, R.X., Jackson, R.W. (2006) “Passive charge modulation for a wireless pressure sensor,” IEEE Sensors Journal 6:1 pp. 47-54
Fan, B., Munavalli, M., Kazmer, D.O. (2006) “Polymer flow in a melt pressure regulator,” Journal of Manufacturing Science and Engineering, Transactions of the ASME 128:3 pp. 716-722
Kazmer, D.O., Nageri, R., Kudchakar, V., Fan, B., Gao, R. (2006) “Validation of three on-line flow simulations for injection molding,” Polymer Engineering and Science 46:3 pp. 274-288
Kazmer, D.O., Knepper, P., Johnston, S.P. (2005) “A Review of In-Mold Pressure and Temperature Instrumentation,” Society of Plastics Engineers Annual Technical Conference51:
Kazmer, D.O., Gao, R., Cui, Y., Johnston, S.P., Knepper, P. (2005) “Concept Design of a Wireless Pressure, Temperature, and Flow Rate Sensor for Injection Molding,” Society of Plastics Engineers Annual Technical Conference 51:
Zhang, L., Theurer, C.B., Gao, R.X., Kazmer, D.O. (2005) “Design of ultrasonic transmitters with defined frequency characteristics for wireless pressure sensing in injection molding,” IEEE transactions on ultrasonics, ferroelectrics, and frequency control 52:8 pp. 1360-1371
Fan, B., Kazmer, D.O. (2005) “Low-temperature modeling of the time-temperature shift factor for polycarbonate,” Advances in Polymer Technology 24:4 pp. 278-287
Kazmer, D.O., Nageri, R., Fan, B., Kudchadkar, V., Johnston, S.P. (2005) “Validation of On-Line Molding Process Simulation,” Society of Plastics Engineers Annual Technical Conference51:
Zhang, L., Theurer, C.B., Gao, R.X., Kazmer, D.O. (2004) “A self-energized sensor for wireless injection mold cavity pressure measurement: Design and evaluation,” Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME 126:2 pp. 309-318
Fan, B., Kazmer, D.O., Bushko, W.C., Theriault, R.P., Poslinski, A.J. (2004) “Birefringence prediction of optical media,” Polymer Engineering and Science 44:4 pp. 814-824
Theurer, C.B., Zhang, L., Kazmer, D.O., Gao, R.X. (2004) “Energy Extraction for a Self-Energized Pressure Sensor,” IEEE Sensors Journal 4:1 pp. 28-35
Kazmer, D.O., Lotti, C., Bretas, R.E., Zhu, L. (2004) “Tuning and control of dimensional consistency in molded products,” Advances in Polymer Technology 23:3 pp. 163-175
Kazmer, D.O., Kudchadkar, V., Nageri, R. (2004) “Validation of moulding consistency with a self-regulating melt pressure valve,” Plastics, Rubber and Composites 33:9-10 pp. 438-445
Roser, C., Kazmer, D.O., Rinderle, J. (2003) “An economic design change method,” Journal of Mechanical Design, Transactions Of the ASME 125:2 pp. 233-239
Zhu, L., Kazmer, D.O. (2003) “An Extensive Simplex Method for mapping global feasibility,” Engineering Optimization 35:2 pp. 165-176
Fan, B., Kazmer, D.O., Bushko, W.C., Theriault, R.P., Poslinski, A.J. (2003) “Warpage prediction of optical media,” Journal of Polymer Science, Part B: Polymer Physics 41:9 pp. 859-872
SELECTED PRESENTATIONS
FDM Bond Strength: Experiments and Simulations Based on Healing Models – 2nd Annual Meeting of the Polymer Processing Society, 2016 – Lyon, France, July 25-29
A Protocol for Filament Production and Use in Fused Deposition Modeling – Accepted to Extrusion Division of the Society of Plastics Engineers’ Annual Technical Conference, 2016 – Indianapolis, IN, May 22-25
Single Pellet Extrusion – Accepted to Extrusion Division of the Society of Plastics Engineers’ Annual Technical Conference, 2016 – Indianapolis, IN, May 22-25
Current & Future Research on Rheological Constitutive Modeling, March 2016 – Ramat Gan, Israel
Acoustic-Based Wireless Data Transmission for Process Monitoring – Z. Fan, R. X. Gao, N. Asadizanjani, and D. O. Kazmer, 2013
Faculty Perspectives on Service-Learning in Engineering Education: Challenges and Opportunities – B. G. Tucker, D. O. Kazmer, O. Pierrakos, C. Swan, A. R. Bielefeldt, K. Paterson, A. Soisson, June 2013 – Atlanta, GA
Melt Flow Simulation of an Injection Molding Cavity for Validation of a Multivariate Sensor – G. W. Gordon, D.O. Kazmer, M. K. Fisches, R. X. Gao, Z. Fan, and N. Asadiznajani, April 2013 – Cincinnati, OH
Development of an Induction Heated Roll-To-Roll Lithography Process – M. E. Moriarty, D. O. Kazmer, C. Barry, J. Mead, C. Santeufemio, April 2013 – Cincinnati, OH
Verification of Rheological Mixing Rules to the application of Masterbatches – M. K. Fisches, D.O. Kazmer, R. X. Gao, G. W. Gordon, Z. Fan, and N. Asadiznajani, April 2013 – Cincinnati, OH
System Identification and Modeling of Capillary Melt Rheological Data – Symposium in Honor of A. Isayev at the SPE Annual Technology Conference, April 2013 – Cincinnati, OH
– Temperature Modeling for a Multivariate Injection Molding Sensor, April 2013 – Cincinnati, OH
– Validation of an Analytical Method to Estimate the Bulk Melt Temperature from In-Mold Temperature Data, April 2013 – Cincinnati, OH
Opportunities in the Hot Runners and Plastics Industry – MKS Markets Meeting, March 2013
Economic Value Added of Engineering Education – American Society of Engineering Education National Conference, 2012 – San Antonio, Texas
Gender and Tenure Effects on Engineering Faculty Attitudes toward Service-Learning – American Society of Engineering Education National Conference, 2012 – San Antonio, Texas
Coded Acoustic Wave Modulation for Multi-Parameter Transmission – IEEE International Instrumentation and Measurement Technology Conference, 2012 – Graz, Ausria
Coded acoustic wave modulation for multi-parameter transmission – Instrumentation and Measurement Technology Conference (I2MTC), 2012 – Cincinnati, OH
A Multivariate In-Mold Sensor Design For Measurement of Melt Pressure, Temperature, Velocity, and Viscosity – Society of Plastics Engineers Annual Technical Conference, 2012 – Orlando, Florida
Development of a Method for Measuring the Thermal Contact Resistance and Thermal Conductivity of Electronic Molding Compounds – Society of Plastics Engineers Annual Technical Conference, 2012 – Orlando, Florida
Multivariate Modelling, Fault Detection, and Validation for The Extrusion Process – Society of Plastics Engineers Annual Technical Conference, 2012 – Orlando, Florida
Challenges in Process Simulation – Keynote to the 2012 Molding Innovation Day, September 2012 – Lowell, MA
Viscosity Measurement In Polymer Injection Molding Using A Multivariate Sensor – Proceedings of the ASME 2012 International Symposium on Flexible Automation, June 2012 – St. Louis, MO
Career Strategy: In or Out of the Box? – UML Honors Program, April 2012
Engineering Design and Science – MITS Teacher Professional Development Seminar, February 2012 – Clark University
Instructor: Explore! Investigate! Invent! Engineering – Professional Development Seminar, The Museum Institute for Teaching Science, February 2012
A New Method for Determining Melt Front Velocity through Temperature Measurement – International Mechanical Engineering Congress, 2011 – Denver, Colorado
Symposium in Scalable Methods for Processing Nano-engineered Materials, Structures, and Devices – Passive Multi-Scale Alignment, 2011 – Denver, Colorado
Extrusion Instrumentation and Characterization – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2011 – Boston, MA
Fault Detection in Extrusion – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2011 – Boston, MA
On-Line Optimization of Injection Molding – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2011 – Boston, MA
Why We Need to Improve STEM Education in the Merrimack Valley – Keynote Speaker, STEM Education Summit, November 2011 – Merrimack College
Feasibility Analysis of an In-Mold Multivariate Sensor – Society of Plastics Engineers Annual Technical Conference, May 2011 – Boston, MA
Design of a Self-Energized Wireless Sensor for Simultaneous Pressure and Temperature Measurement – International Conference on Advanced Intelligent Mechatronics, 2010
BioModular Multi-Scale Systems – Joint US-Ireland Conference on Bio-Nano Systems, 2010 – Lowell, MA
Multivariate Quality Control – Molding Executive Conference, 2010
A Plastics Manufacturing Systems Education – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2010 – Orlando, FL
Validation of in-mold shrinkage sensor for different cavity thicknesses – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2010 – Orlando, FL
Feasibility Analysis of an In-Mold Multivariate Sensor – Process Monitoring and Control Symposia, July 2010 – Banff, Alberta, Canada
Multivariate Quality Control – Executive Conference Management Molding Conference, April 2010 – San Antonio, TX
Self-Energized Acoustic Wireless Sensor for Pressure-Temperature Measurement in Injection Molding Cavity – IEEE Sensors Conference, 2009
Efficacy of saturated design of experiments in multivariate process characterization – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2009 – Chicago, IL
In-Mold Shrinkage Monitoring Sensor for Injection Molding – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2009 – Chicago, IL
Multivariate robustness measurement – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2009 – Chicago, IL
Teaching Mold Design: From Concept to Creation – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2009 – Chicago, IL
Numerical Simulation of Polymer Phase Separation on a Patterned Substrate with Nano Features – NanoTech Conference, 2008 – Boston, MA
Structural optimization of a dual-sensing module for temperature and pressure measurement in injection mold cavity – Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2008
A comparison of statistical process control and principal components analysis – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2008
A six sigma quality controller – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2008
Melt bulk temperature dynamics during mold filling – Society of Plastic Engineers Annual Technical Conference, 2008 – Milwaukee, WI
In-mold shrinkage monitoring sensor for injection molding, November 2008
Design and Evaluation of A Modulator Circuit for a Self-Energized Wireless Sensor – International Mechanical Engineering Congress & Exposition, November 2008
Numerical Simulation of Phase Separation in Polymer-Polymer-Solvent System For High-Rate Nano Manufacturing, November 2008
Macro to nano control in plastics molding – University of Akron Polymer Engineering Department Seminar, October 2008 – Akron, OH
Comparison of Switchover Methods for Injection Molding – Primaus Users’ Group Annual Meeting, September 2008 – Cleveland, OH
Numerical Simulation of Composition Induced Phase Separation in a Polymer-polymer-solvent Ternary System on a Patterned Substrate with Nano Features – IEEE Conference on Nanotechnology, August 2008 – Arlington, TX
Service-Learning Projects in 35 Core Undergraduate Courses, June 2008 – Pittsburgh, PA
A Comparison of Seven Transfer Methods for Velocity to Pressure Switchover – Society of Plastics Engineers Annual Technical Conference, May 2008 – Milwaukee, WI
In-Mold Temperature and Pressure Sensors for On-Line Detection of Jetting – Society of Plastics Engineers Annual Technical Conference, May 2008 – Milwaukee, WI
Lions and tigers and freshmen – Society of Plastics Engineers Annual Technical Conference, May 2008 – Milwaukee, WI
The effect of mold temperature on the surface phase morphology of injection molded thermoplastic elastomers – Society of Plastics Engineers Annual Technical Conference, May 2008 – Milwaukee, WI
The effects of temperature and relative humidity on injection molded part quality – Society of Plastics Engineers Annual Technical Conference, May 2008 – Milwaukee, WI
Towards Controllability of Polymer Processing – Louisiana State University Mechanical Engineering Seminar, April 2008
Service-learning integrated into existing core courses throughout a college of engineering – American Society of Engineering Education Annual Conference, 2007
Characterization of Polymer Flows in Very Thin Gaps – Proceedings of the 2007 International Manufacturing Science & Engineering Conference (MSEC), October 2007 – Atlanta, GA
Introduction to Engineering through Service Learning – ASME IDETC 4th Symposium on International Design and Design Education, September 2007 – Las Vegas, NV
Analysis of Design for Global Manufacturing Guidelines – ASME IDETC Design for Manufacturing Conference, September 2007 – Las Vegas, NV
Analysis and Validation of Mold Design Guidelines for Cooling Time and Runner Sizing – Proceedings of the Society of Plastics Engineers Annual Technical Conference, May 2007 – Cincinnati, OH
Causes of Melt Temperature Variations Observed in the Nozzle during Injection Molding – Proceedings of the Society of Plastics Engineers Annual Technical Conference, May 2007 – Cincinnati, OH
Estimation of Bulk Melt Temperature from In-Mold Sensors: Part 2 – Convection – Proceedings of the Society of Plastics Engineers Annual Technical Conference, May 2007 – Cincinnati, OH
Multivariate Process Analysis for the Prediction of Injection Molded Part Quality – Proceedings of the Society of Plastics Engineers Annual Technical Conference, May 2007 – Cincinnati, OH
Domain-Centric Education Delivered On-Line – UML College of Engineering Seminar, December 2006
Estimation of Melt Temperature from In-Mold Temperature Sensor Data – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2006
Flash Prevention due to Skin Solidification – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2006
Multi-Objective Velocity Profile Optimization – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2006
Pressure Regulation of the Extrusion Process – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2006
Design of an Acoustic Transmitter for Temperature-Pressure Dual Sensing in Injection Molding – 5th IEEE Conference on Sensors, October 2006 – Daegu, Korea
Learning through Service: Analysis of a First, College Wide Service Learning Course – Annual Conference of the American Society of Engineering Education, June 2006 – Chicago, IL
Service-Learning Integrated throughout a College of Engineering – Annual Conference of the American Society of Engineering Education, June 2006 – Chicago, IL
A Data Driven Approach to Attaining 100% Automatic Quality Assurance – Society of Plastics Engineers E-Live Seminar, April 2006
Low Volume Plastics Manufacturing Strategies – Design for Manufacturing Symposium at the ASME International Mechanical Engineering Congress and Exposition, 2005
Self-Regulating Melt Brakes for Dynamic Control of Molten Plastics – National Science Foundation Design & Manufacturing Conference, 2005 – Scottsdale, AZ
SST/Collaborative Research: Self-Powered Wireless Sensor Array for Pressure, Volume, and Temperature Monitoring of Injection Molding – National Science Foundation Design & Manufacturing Conference, 2005 – Scottsdale, AZ
A Review of In-Mold Pressure and Temperature Instrumentation – Proceedings of the 2005 Society of Plastics Engineers Annual Technical Conference, 2005
An Investigation into Hesitation Effects in Oscillating Flows – Proceedings of the 2005 Society of Plastics Engineers Annual Technical Conference, 2005
Concept Design of a Wireless Pressure, Temperature, and Flow Rate Sensor for Injection Molding – Proceedings of the 2005 Society of Plastics Engineers Annual Technical Conference, 2005
Derivation of Process Windows – Proceedings of the 2005 Society of Plastics Engineers Annual Technical Conference, 2005
Design And Performance Analysis Of A Self-Regulating Melt Pressure Valve – Proceedings of the 2005 Society of Plastics Engineers Annual Technical Conference, 2005
Performance of a Self-Regulating Melt Pressure Valve – Proceedings of the 2005 Society of Plastics Engineers Annual Technical Conference, 2005
Validation of On-Line Molding Process Simulation – Proceedings of the 2005 Society of Plastics Engineers Annual Technical Conference, 2005
Wall Thickness Optimization In Molded Product Design – Proceedings of the 2005 Society of Plastics Engineers Annual Technical Conference, 2005
Energy efficiency analysis of a self-powered pressure sensor using bond graph – Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace, 2005
Instrumented Molding Cells – Priamus Users’ Group Annual Meeting, October 2005
What’s the big deal about something very small? The Business of Nano – Rotary Club Meeting, May 2005 – Dracut, MA
Self-Regulating Melt Valves for Polymer Processing – SPE Merrimack Valley Meeting, National Plastics Center, May 2005
Advanced Methods for Plastic Product Design and Process Control – Toyota Motor and Suppliers Meeting, April 2005 – Lowell, MA
Simulation of Polymer Processing – National Science Foundation Center for High Rate Nano-Manufacturing, March 2005 – Lowell, MA
Design and Validation of a Self-Compensating Melt Regulator for Plastics Extrusion – 2004 Society of Plastics Engineers Annual Technical Conference, 2004 – Chicago, IL
On-Line Flow Rate and Pressure Analysis with Sensor Fusion – 2004 Society of Plastics Engineers Annual Technical Conference, 2004 – Chicago, IL
New Directions in Design for Manufacturing – ASME DETC 9th Design for Manufacturing Conference, 2004
Plastic Product and Process Design Strategies – ASME DETC 9th Design for Manufacturing Conference, 2004
An Integrated Performance Modeling System – Design for Manufacturing Symposium at the 2004 International Mechanical Engineering Congress, 2004 – Anaheim, CA
Synthesis of Melt Pumps and Brakes for Polymer Processing – National Science Foundation Design & Manufacturing Conference, 2004
Synthesis of Melt Pumps and Brakes for Polymer Processing – National Science Foundation Design & Manufacturing Conference, 2004
The Economics of Lights Out Manufacturing – Society of Plastics Engineers Topical Conference on Injection Molding Systems, October 2004 – Cleveland, OH
Design for Manufacturing: Future Directions for DfX – ASME Design Engineering Technical Conferences, September 2004 – Salt Lake City
Advances in Molding Technology – Delphi Central Research, August 2004 – Detroit, MI
Simulation of Polymer Flow in a Dynamic Pressure Regulator – 8th International Conference on Numerical Methods in Manufacturing Processes, June 2004
Competitive Molding Technologies – Society of Manufacturing Engineers EASTEC Lean Manufacturing Conference, May 2004 – Springfield, MA
Declaring an Engineering Major: By Choice or By Chance – American Society of Engineering Education New England Section 2004 Annual Conference, April 2004
Modern Injection Molding – Northeast Utilities Energy Conservation Seminar, March 2004 – Berlin, CT
Self-Powered Sensing for Mechanical System Condition Monitoring – SPIE Symposium on Smart Structures & Materials/ NDE, March 2004 – San Diego, CA
Competing in the 21st Century – Plastics Institute of America Quarterly Meeting, February 2004 – Lowell, MA
An Evolving, Model-Based Quality Function Deployer – ASME DETC 8th Design for Manufacturing Conference, 2003
Elimination of Process Constraints in Plastics Injection Molding – Molding 2003 Executive Technology Conference, 2003 – New Orleans, LA
Fundamentals of Plastic Part Design and Manufacture – National Manufacturing Week Workshop, 2003 – Chicago, IL
Design and Experimental Validation of a Self-Energized Sensor for Injection Molding Process Monitoring – Proceedings of the 5th National Science Foundation Design & Manufacturing Conference, 2003
Frequency Design of an Ultrasonic Transmitter for Injection Molding Pressure Measurement – Proceedings of the North American Manufacturing Research Conference of SME, 2003
Effect of Low Temperature Shift Factor Modeling on Predicted Part Quality – Society of Plastics Engineers Annual Technical Conference, 2003 – Nashville,TN
Future Directions for Plastics Engineering Education – Society of Plastics Engineers Annual Technical Conference, 2003 – Nashville,TN
Hedge Strategies for Plastics Part Design – Society of Plastics Engineers Annual Technical Conference, 2003 – Nashville,TN
Layout Design of a Platenless Molding Machine – Society of Plastics Engineers Annual Technical Conference, 2003 – Nashville,TN
Prediction of Production Yields in Injection Molding I – Society of Plastics Engineers Annual Technical Conference, 2003 – Nashville,TN
Simulation of Optical Media Molding – Society of Plastics Engineers Annual Technical Conference, 2003 – Nashville,TN
Thermal Control of Melt Flow in Cylindrical Geometries – Society of Plastics Engineers Annual Technical Conference, 2003 – Nashville,TN
Wireless Pressure Sensor for Injection Molding – Society of Plastics Engineers Annual Technical Conference, 2003 – Nashville,TN
Dimensional Tolerancing and Control in Molded Products – Proceedings of the 2003 ASME International Mechanical Engineering Congress & Exposition, November 2003 – Washington, D.C.
In-Situ Evaluation of a Piezoelectric Energy Extraction Device for Wireless Cavity Pressure Sensing in Injection Molding – Proceedings of the 2003 ASME International Mechanical Engineering Congress & Exposition, November 2003 – Washington, D.C.
Real Time Flow Rate Estimation in Injection Molding – Molding Technology Symposium at the 20th Annual Meeting of the Polymer Processing Society, June 2003 – Akron, OH
An Investigation of Variation and Uncertainty in Six Sigma – ASME DETC 7th Design for Manufacturing Conference, 2002
Self-Energized Wireless Pressure Sensor Using Energy Extraction from Injection Mold Pressure Differential – IEEE Sensors Conference, 2002
Design of a Wireless Sensor for Injection Molding Cavity Pressure Measurement – Proceedings of the 4th National Science Foundation Design & Manufacturing Conference, 2002– San Juan, Puerto Rico
The Development of Robust & Confident Decision Spaces – Proceedings of the 4th National Science Foundation Design & Manufacturing Conference, 2002 – San Juan, Puerto Rico
Development of a wireless pressure sensor with remote acoustic transmission – Proceedings of the North American Manufacturing Research Conference of SME, 2002
Input Profiling for Injection Molding by Reinforcement Learning – Society of Mechanical Engineers, Dynamic Systems and Control Division, 2002
Threshold energy switching and its application to wireless sensing in high energy manufacturing process – ASME International Mechanical Engineering Congress and Exhibition, Symposium on Intelligent Sensors and Sensor Networks, November 2002 – New Orleans, LA
An extensive simplex method mapping the global feasibility – Proceedings of the 28th Design Automation Conference, ASME Design Engineering Technical Conferences, September 2002 – Montreal, Quebec, Canada
How Increased Control in Plastic Melt Delivery Increases Productivity – Accepted to Society of Plastics Engineers Annual Technical Conference, May 2002
Commercial Applications for Dynamic Feedª Providing Dimensional Control for Each Injection Cavity – K-Plast Processing Innovations, 2001 – D?sseldorf/Neuss, Germany
Advanced Process Control Techniques – PlasticsUSA Molding Technology 2001, 2001 – Chicago, IL
Shear Rates in Dynamic Feed – Proceeding of the Plastics Odyssey, SPE Regional Technical Conference, 2001 – Rochester, NY
Qualitative Reasoning for Decision Synthesis – Proceedings of ASME DETC 6th Design for Manufacturing Conference, 2001 – Pittsburgh, PA
Knowledge-Based Interval Modeling Method for Tuning Injection Molding Machines – Proceedings of the 3rd National Science Foundation Design & Manufacturing Conference, 2001
Some Advances in Design Representation and Feasibility Analysis – Proceedings of the 3rd National Science Foundation Design & Manufacturing Conference, 2001
Design of a wireless sensor for injection molding cavity pressure measurement – International Symposium on Intelligent Sensors, ASME International Mechanical Engineering Congress and Exhibition, November 2001 – New York, NY
Dynamic Feed Ð Precision Molding in a Family Tool Application – Plastics Odyssey, September 2001 – Rochester, NY
Input Profiling for Injection Molding by Reinforcement Learning – Joint USA/Japan Symposium on Manufacturing, June 2001
Simulation Based Optimization of Injection Molding – International Polymer Processing Society, May 2001
Acoustic Telemetry in Injection Molding – Society of Plastics Engineers Annual Technical Conference, May 2001 – Dallas, TX
An Assessment of Dynamic Feed Control in Modular Tooling – Society of Plastics Engineers Annual Technical Conference, May 2001 – Dallas, TX
Dynamic Cooling Design for Injection Molding – Society of Plastics Engineers Annual Technical Conference, May 2001 – Dallas, TX
Model Predictive Control of Injection Molding – Society of Plastics Engineers Annual Technical Conference, May 2001 – Dallas, TX
CAE & Polymer Processing Monitoring & Control: A Design Perspective – 2001 Gordon Conference on CAE in Polymer Processing, March 2001 – Ventura, CA
Virtual Search Method for Injection Molding – GE Plastics, 2000
A Method for Multi-Criteria Decision Making – Informs Decision Systems, 2000 – Austin TX
Decision Based Design: Some Questions – NSF Open Workshop on Decision Based Design, 2000 – Baltimore, MD
Dynamic Cooling For Injection Molding – Office of Naval Research Progress Reports, 2000
A Knowledge Based Tuning Method for Injection Molding – Proceedings of Controls Division of the ASME International Mechanical Engineering Congress & Exposition, 2000
Process Design For Optimal Mold Cooling – Proceedings of Materials Processing Symposium of the ASME International Mechanical Engineering Congress & Exposition, 2000
A Performance-Based Representation Of Constraint Based Reasoning And Decision Based Design – Proceedings of the 12th Design Theory & Methodology Conference, ASME Design Engineering Technical Conferences, 2000
Incorporation of Engineering Analysis within Design Synthesis – Proceedings of the 2nd National Science Foundation Design & Manufacturing Conference, 2000 – Monterrey, Mexico
Method of Tuning and Automatic Regulation for Injection Molding – Proceedings of the 2nd National Science Foundation Design & Manufacturing Conference, 2000 – Monterrey, Mexico
Advances in Mechanical Systems Synthesis – Proceedings of the 3rd National Science Foundation Design & Manufacturing Conference, 2000 – Tampa, FL
Knowledge Based Interval Modeling Method for Tuning Injection Molding Machines – Proceedings of the 3rd National Science Foundation Design & Manufacturing Conference, 2000– Tampa, FL
Flexible Design Methodology – Proceedings of the 5th Design for Manufacturing Conference, ASME Design Engineering Technical Conferences, 2000
A Knowledge Based Tuning Method – Proceedings of the Annual Technical Meeting of the Society of Plastics Engineers, 2000 – Orlando, FL
A Method For Robust Flexible Design – Proceedings of the Annual Technical Meeting of the Society of Plastics Engineers, 2000 – Orlando, FL
Fundamentals of Polymer Processing – Proceedings of the Annual Technical Meeting of the Society of Plastics Engineers, 2000 – Orlando, FL
Axiomatic Design Of The Injection Molding Process – Proceedings of the First International Conference on Axiomatic Design, 2000 – Cambridge, MA
A Knowledge Based Tuning Method for Injection Molding Machines – Proceedings of the USA-Japan Symposium on Manufacturing Technologies, 2000
Quality Control Capability Assessment – Society of Manufacturing Engineers Plastics Molding & Manufacturing Annual Trends Report, 2000
Trends in the Plastics Industry: Product Development Paradigms and Impact on Human Resources – Society of Manufacturing Engineers Plastics Molding & Manufacturing Annual Trends Report, 2000
Interactive Learning: Simulating The Design Process – Symposium on Manufacturing Education, 2000 – Stanford University
Feasibility Mapping of Non-Linear Systems – Proceedings of the Institute for Operations Research and the Management Sciences, November 2000 – Austin, TX
Engineering Systems Design: Gaining Controllability of Dynamic Processes – Dartmouth Thayer School of Engineering Jones Seminar, May 2000
Synthesis and Analysis of Quality Control Methods for Intelligent Processing of Polymeric Materials – Canada National Research Center, February 2000 – Montreal, Quebec, Canada
A Study of Cooling for Steady-State Injection Molding – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1999 – New York, NY
Defect Cost Analysis – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1999 – New York, NY
Effect of Complexity on Cost & Time to Market of Injection Molded Parts – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1999 – New York, NY
Shrinkage Prediction of Thermoformed Part – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1999 – New York, NY
Studies of Plastic Boss Design and Methodologies – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1999 – New York, NY
Transfer Function Development for Injection Molding of Optical Media – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1999 – New York, NY
Utilization of Dynamic Feed Control in Family Tools – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1999 – New York, NY
Validation of a Stiffness-Based Ejection Criterion for Injection Molding – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1999 – New York, NY
Yield Maximization In Injection Molding by the Virtual Search Method – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1999 – New York, NY
A Performance-Based Representation for Engineering Design – Proceedings of the 11th Annual ASME Design Theory and Methodology Conference, 1999 – Las Vegas, NV
Optimal Component Consolidation in Plastic Product Design – Proceedings of the 4th Annual ASME Design for Manufacturing Conference, 1999 – Las Vegas, NV
Risk Effect Minimization using Flexible Design – Proceedings of the 4th Annual ASME Design for Manufacturing Conference, 1999 – Las Vegas, NV
Towards Controllability of Injection Molding – Proceedings of the Materials Processing Symposium, ASME International Mechanical Exposition, 1999
Polymer Part Design & Processing – University of Massachusetts Polymer Science & Engineering Symposium, 1999
Manufacturing Process Design: Towards Controllability of Injection Molding – Lehigh University Mechanical Engineering Departmental Seminar, November 1999
Modeling The Effects of Complexity on Manufacturing Costs and Time-To-Market of Plastic Injection Molded Products – Proceedings of the Tenth Annual Conference of the Production and Operations Management Society, March 1999 – Charleston, SC
Commanding the Technical Frontier: Engineering Education for the 21st Century – 50th Anniversary Celebration of the University of Massachusetts Amherst College of Engineering, 1998
On the Divergence of Case Studies and Hardware Prototypes in Active Learning – American Society of Engineering Education Northeast Regional Meeting, 1998
A Theory of Constraints for Molded Part Design and Manufacture – GE Research & Development, 1998
Manufacturing Process Design – Massachusetts Institute of Technology Design Research Seminar, 1998
A Theory of Constraints for Design and Manufacture of Thermoplastic Parts – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1998 – Atlanta, GA
Automatic Tuning of Injection Molding by the Virtual Search Method – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1998 – Atlanta, GA
Correlation Of Spiral And Radial Flow Lengths For Injection-Molded Thermoplastics – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1998 – Atlanta, GA
Development of a Hybrid Neural Network for Quality Control of Injection Molding – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1998 – Atlanta, GA
Economic Design Of Injection Molded Parts Using DFM Guidelines – A Review Of Two Methods For Tooling Cost Estimation – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1998 – Atlanta, GA
Utilization of Dynamic Feed Control for Commercial Applications – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1998 – Atlanta, GA
Consistency of Multi Cavity Melt Control Injection Molding in a Commercial Application – Proceedings of the Society of Plastics Engineers Annual Technical Conference, 1998 – Atlanta, GA
Beyond Analysis: Leveraging Computer Aided Engineering throughout Design and Processing – First Gordon Conference for CAE in Polymer Processing, 1997
Dynamic Feed Control: Technology for Injection Molding Flexibility & Capability – GE Plastics, 1997
Methods and Benefits of Establishing a Process Window – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1997
Quantifying the Economic Value Added of On-Line Quality Control Systems – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1997
Quality Regulation Techniques for Injection Molding – Proceedings of Polymer Process Engineering, 1997
The Definition and Use of the Process Flexibility Index – Proceedings of the 1997 ASME Design for Manufacturing Conference, 1997
Multi-Cavity Melt Control for Injection Molding – Proceedings of the ASME International Mechanical Exposition, 1997
The Challenges of Intelligent Process Control – Proceedings of the International Polymer Processing Symposium, 1997
Analysis and Synthesis of Methods for Intelligent Processing of Polymeric Materials – Proceedings of the Polymer Processing Symposium, ASME International Mechanical Exposition, 1997
On-Line Injection Control Systems Ace the Value Test – Modern Plastics, November 1997
An On-line Quality Monitoring System for Thermoplastic Injection Molding – Proceedings from the 1996 AIChE Conference, 1996
Quantifying Design and Manufacturing Robustness through Stochastic Optimization Techniques – Proceedings of the 22nd Annual ASME Design Automation Conferenc, 1996
Application of Matlab¨ to Injection Molding Quality Control – Proceedings of the 3rd Annual Matlab Users Conference, 1996 – Melbourne, Australia
Experimental Comparison of State of the Art High Shear Rate Polymer Rheological Characterization Techniques – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1994
Increasing Knit-Line Strength through Dynamic Control of Volumetric Shrinkage – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1994
Introduction to Dynamic Feed Control – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1994
Runner System Balancing for Injection Molds using Approximation Concepts and Numerical Optimization – Proceeding from the 18th Annual ASME Design Automation Conference, 1992
An Experimental Validation of a Shrinkage/Warpage Predictor – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1992
Examination of Material Characterization and Modeling Techniques for Injection Molding Simulation – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1992
Validation of Radial-Filling Simulation Software – Proceeding of the Society of Plastics Engineers Annual Technical Conference, 1992
Simulation of the Blow Molding and Thermoforming Processes – Proceedings of the International Industrial Engineering Conference, May 1992 – Chicago, IL
Advanced Design Methodologies for the Blow Molding Process – 20th Annual Structured Products Conference, Society of the Plastics Industry, 1991
Experimental and Numerical Investigations of the Thermoforming Process – Proceedings from the American Society of Mechanical Engineers Winter Annual Meeting, 1991
Application of an Axisymmetric Element for Injection Molding Analysis – Proceedings from the Society of Plastics Engineers Regional Technical Conference, 1990 – Boston, MA
SELECTED INTELLECTUAL PROPERTY
Patent – Kazmer, D.O.“Method and System for Multivariate Remote Monitoring Of Polymer Processing.,” 2013006468
Patent – Kazmer, D.O.“Apparatus and Methods For Multi-Scale Alignment And Fastening,” 2012162369
– Kazmer, D.O.“Methods for forming injected molded parts and in-mold sensors therefore,” WO/2009/129230 Patent Cooperation Treaty
Patent – Kazmer, D.O.“Performance-based representation for support of multiple decisions,” 7,408,551 United States
Patent – Kazmer, D.O.“Melt control system for injection molding,” 7,175,418 United States
Patent – Kazmer, D.O.“Methods and devices for melt pressure regulation,” WO/ 2005/113215 Patent Cooperation Treaty
Patent – Kazmer, D.O.“Apparatus for utilizing an actuator for flow control valve gates,” 6,824,379 United States
Patent – Kazmer, D.O.“Controlled injection using manifold having multiple feed channels,” 6,767,486 United States
– Kazmer, D.O.“Manifold system having flow control,” 6,713,002 United States
Patent – Kazmer, D.O.“Manifold system having flow control,” 6,769,896 United States
Patent – Kazmer, D.O.“Apparatus and method for proportionally controlling fluid delivery to readily replaceable mold inserts,” 6,638,049 United States
Patent – Kazmer, D.O.“Apparatus and method for purging injection molding system,” 6,514,440 United States
Patent – Kazmer, D.O.“Controlled injection using manifold having multiple feed channels,” 6,589,039 United States
Patent – Kazmer, D.O.“Dynamic feed control system,” 6,632,079 United States
Patent – Kazmer, D.O.“Machine for proportionally controlling fluid delivery to a mold,” 6,585,505 United States
Patent – Kazmer, D.O.“Apparatus and Method for Proportionally Controlling Fluid Delivery to Stacked Molds,” WO/02/074516,
Patent – Kazmer, D.O.“Controlled injection using manifold having multiple feed channels,” WO/02/36324
Patent – Kazmer, D.O.“Manifold system having flow control,” 6,464,909 United States
Patent – Kazmer, D.O.“Manifold system having flow control using pressure transducers,” 6,343,922 United States
Patent – Kazmer, D.O.“Manifold system having flow control using pressure transducers,” 6,361,300 United States
Patent – Kazmer, D.O.“Manifold system having flow control using separate cavities,” 6,343,921 United States
Patent – Kazmer, D.O.“Method using manifold system having flow control,” 6,436,320 Patent Cooperation Treaty
Patent – Kazmer, D.O.“Apparatus for proportionally controlling fluid delivery to a mold,” 6,309,208 United States
Patent – Kazmer, D.O.“Apparatus for proportionally controlling fluid delivery to a mold,” 6,287,107 United States
Patent – Kazmer, D.O.“Dynamic Feed Control System,” WO/2001/060580
Patent – Kazmer, D.O.“Electric actuator for a melt flow control pin,” 6,294,122 United States
Patent – Kazmer, D.O.“Manifold System Having Flow Control,” WO/01/21377
Patent – Kazmer, D.O.“Manifold system having flow control using extended valve pin,” 6,254,377 United States
Patent – Kazmer, D.O.“Manifold system having proportional flow control,” WO/2001/034364
Patent – Kazmer, D.O.“A performance-based representation for support of multiple decisions,” WO/2000/072268
Patent – Kazmer, D.O.“Manifold System Having Flow Control,” WO/1999/054109 United States
Patent – Kazmer, D.O.“Injection molding gate flow control,” 5,556,582 United States
SELECTED CONTRACTS, FELLOWSHIPS, GRANTS AND SPONSORED RESEARCH
Enhanced Controllability in Roll-to-Roll Thermal Imprinting (), Sponsored Research – NSF Manufacturing Machines & Equipment
Science and Engineering Active Learning (), Sponsored Research – Office of Naval Research HBCU/MI Program
Technical Feasibility of Decoupled Gating (2003), Sponsored Research – Mold Masters Ltd Kazmer, D.
Technical Feasibility of Isothermal Molding (2002), – Thermo-CeramiX LLC Kazmer, D.
Lowell Tex: Embracing Lowell’s Cultural, Historical, and Educational Assets to Create Pathways to STEM (2015), Grant – UMass President’s Office Hansen, C.J. (Co-Principal), Kuhn, S. (Principal), Kazmer, D.O. (Co-Principal), Reynaud, E. (Co-Principal), Levasseur, K.M. (Co-Principal), Scribner-Maclean, M. (Co-Principal)
3D Printed Engineering Thermoplastics (3DPET) (2015), Grant – UMass President’s Office Hansen, C.J. (Co-Principal), Mead, J.L. (Principal), Kazmer, D.O. (Co-Principal), Barry, C.M. (Co-Principal), Orbey, N. (Co-Principal)
ARRAS – U-TEACH UMass Lowell (2011), – U.S. DEPARTMENT OF EDUCATION Kazmer, D.O. (Co-Principal)
Collaborative Research: Multi-Variate Remote Process Sensing for Improved Observ (2010), Grant – Kazmer, D.O. (Principal)
Collaborative Research: Engineering Faculty Engagement in Learning Through Servic (2010), Grant – Kazmer, D.O. (Principal)
Collaborative Research: Engineering Faculty Engagement in Learning Through Servic (2010), Grant – Kazmer, D.O. (Principal)
Fellow (2011), Fellowship – Society of Plastics Engineers
Multivariate Statistical Process Controls for Polymer Processing (2005), Sponsored Research – MKS Instruments
